 |
Broken crank - not mine, not sure whose it is. It is a stock
25HP crank. |
 |
Bad pulley - this is what happens when you try to use a
aluminum pulley with no steel sleeve on a sand seal setup. |
 |
Cracked remote filter housing |
 |
Worn pushrod - stock one on my bus engine. Pushrod tube
shifted and bent, causing rub. Talk about CLOSE. |
 |
Stretched head stud. This was a Bugpack stud that never saw
more than 20 ft-lbs of torque. |
 |
Rough bearing (#4, probably lack of oil, some pounding) |
 |
Pitted cam - weak springs are probably the cause, not for
sure, but it sucked. |
 |
Sand seal - we don't know what happened here. |
 |
This is a good one.. this and the one below are from a car that was
towed at 40mph in first gear. I guess they found redline. Thanks to Casey
(Earthquake on
The Samba) for the pics and description. |
 |
This is a good one.. this and the one above are from a car that was
towed at 40mph in first gear. I guess they found redline. Thanks to Casey
(Earthquake on
The Samba) for the pics and description. |
| |
|
